Sonitus Acoustics

Visilio Cherry

Description

A slat wall panel with a real acoustic backing: 25 or 40 mm of Bluefiber Panel instead of thin felt.

Visilio is a wall absorber that looks like the modern slat wall panels now widely sold as “acoustic panels”. The difference is in what sits behind the slats.

Most such panels on the market have a backing of hard-pressed felt about 9 mm thick. Glued to a wall, a layer that thin absorbs little sound, and mostly high frequencies. Visilio uses Bluefiber Panel in a thickness of 25 or 40 mm as its backing: nearly three times, or more than four times, as much absorbing material. On its own, the 25 mm backing absorbs about 80% of the sound at 1000 Hz, and the 40 mm backing reaches that at 500 Hz already, in the speech range (measured in accordance with ISO 354: backing without slats, directly on the wall).

The slats are made of black moisture-resistant MDF, 9 mm thick, finished with a CPL foil that shows its quality at first glance. One panel measures 3000 × 657 mm and covers 1.97 m²; at 3 m long it covers most walls from floor to ceiling without a joint.

It comes in two thicknesses: 34 mm (25 mm backing + 9 mm slats) and 49 mm (40 mm backing + 9 mm slats).

Cutting and mounting

  • To adjust the width, cut the backing between the slats with a sharp utility knife.
  • To shorten the panel, use a handheld circular saw or a jigsaw.
  • Mount it with Acoufix adhesive or a similar mounting adhesive, or with screws.

Features

Dimensions
3000 × 657 mm (1.97 m²)
Thickness
34 mm / 49 mm
Backing
Bluefiber Panel (PET felt), 25 mm or 40 mm
Slats
Black moisture-resistant MDF, 9 mm, CPL foil finish
Colors
Cherry
Mounting
Acoufix or similar mounting adhesive, or screws
Cutting
Backing with a sharp utility knife; length with a circular saw or jigsaw
Contact

Ask about Visilio Cherry

Tell us where you want to use it and we will recommend the right setup.

We use the data you enter only to answer your inquiry. Details: Privacy policy.

More from Visilio